Ford Transit 92-99 seat swivel made by FASP

 

Fitting seat swivels to allow the driver's and passenger's seats to turn round to face backwards is a great way to make the most of the limited space available in a campervan or motorhome.  For the benefit fitting seat swivels bring to your campervan or motorhome we think it is one of the lowest cost, relatively achievable DIY conversion tasks.  For more information read our article about fitting seat swivels.

 

This Seat Swivel is for a Ford Transit van (year 92-99) and it is made by FASP of Italy.  This swivel is for the passenger side only.

 

Campervan Conversion DIY Difficulty: 4/5 - Please note that this swivel can be complicated to fit and may well affect the height of the seat.

  

Things to watch out for:

Things mounted under the seat are a problem if they are higher than the seat base - for example batteries, heaters, etc.  Batteries can usually be replaced with lower profile ones.

Sometimes bolts can catch when swiveling - if this happens you will either need to use shorter bolts, cut down these ones using a hack saw, do some filing, or source some with flat heads.  They need to be high tensile bolts so get them from an appropriate place - often local engineering / welding companies are the best people to go to for this type of problem. 

 

Manufacturer: FASP

For Vehicle: Ford Transit, years 92-99.  Passenger side only.

Crash Tested / TUV Approved: No