Ford Transit 2000+ seat swivel made by FASP (passenger side only)

 

Fitting seat swivels to allow the driver's and passenger's seats to turn round to face backwards is a great way to make the most of the limited space available in a campervan or motorhome.  For the benefit fitting seat swivels bring to your campervan or motorhome we think it is one of the lowest cost, relatively achievable DIY conversion tasks.  For more information read our article about fitting seat swivels.

 

This Seat Swivel is for a Ford Transit van (year 2000 onwards) passenger side only and it is made by Fasp of Italy.  These are high quality seat swivels and has been fully crash tested.

 

Campervan Conversion DIY Difficulty: 2/5 - Note that we haven't had any difficulties reported with this model, but sometimes you may encounter problems with various issues and may need to tweak things to make it work (often this won't be necessary).  Please take photos and let us know of any problems you encounter and we'll provide what help we can.

  

Things to watch out for:

Airbags / seat heating / other wiring - disconnect the battery before doing anything with wiring.  After fitting the swivel, wires can be passed through the hole.

Things mounted under the seat are a problem if they are higher than the seat base - for example batteries, heaters, etc.  Batteries can usually be replaced with lower profile ones.

Sometimes bolts can catch when swiveling - if this happens you will either need to use shorter bolts, cut down these ones using a hack saw, do some filing, or source some with flat heads.  They need to be high tensile bolts so get them from an appropriate place - often local engineering / welding companies are the best people to go to for this type of problem. 

 

Manufacturer: Fasp

For Vehicle: Ford Transit, year 2000 onwards.  Passenger side only.

Crash Tested / TUV Approved: Yes

Hole centres: 434 x 405mm (Please double check this is right for your van)