Old wiring

David Longman's - Task: Wiring & Electrics
Write up for their project Bus ConversionStatus: 0% Complete
No images have been uploaded for this task write up yet
Task Write-up: 

When we took out the original electrics and seating, there were bel-push wires that you don't need. Pull them through to the front and I simply cut them off. There is power to a light that went on when someone pushed a bell switch. I have never used it. If the internal lights don't work, check the fuse box. I found quite a few had blown. There is 24-volt supply to the old electronic destination boards in the front (above the driver), to the side (by the door) and at the back above the window. They could be useful to you.

up
536 users have voted.

Related Products